A.A.C.V.M.

vladimirsinisi escribió:Chicos,
fui a ver a mi mecanico amigo por el tema del motor, me dijo que antes de desarmarlo habria que ponerlo en marcha y ver si a temperatura de trabajo tiene buena presion de aceite por que por ahi no hace falta desarmarlo, que opinan? cual es la presion ideal en los Go Devil?

Abrazo
Vladimir
voy lento en la restauracion pero a paso firme!!

Oil Pressure Gage. Normal oil pressure should not be below
10 with engine idling, and should range from 40 to 50 at running
speeds (at normal operating temperature). If gage fails to register
within 30 seconds, stop engine, and correct or report to higher
authority.

Fuente TM 9-803 Pagina 30

Safe. minimum pressure is 6 lb. [0,421 kg-cm2] at
idIe, at: \Vhich point the oil pressure light goes out
43
D L4-134 ENGINE
on la ter models, and 20 lb. [1,406 kg-cm2] at 2000
rpm. (32 mph. [51 kph.]).
NOTE: Safe minimum pressure of the earlier type
pump is 10 psi. [0,7 kg-cm2] at idle speed. Normal
gauge reading will be 50 at 30 mph. [48 km-hr.].

Fuente 'Jeep' UNIVERSAL and 'Jeep' DISPATCHER LI
L4-134 ENGINE
MODELS CJ-2B., CJ-3B, DJ-3B